Precision Manufacturing of Drone and UAV Parts
Manterra provides drone injection molding for Canadian drone and UAV makers, from first molds to volume production. We mold lightweight frames, housings and sealed electronics enclosures in engineering resins at our facility in Delta, BC.
Drone Injection Molding in Canada
Drone parts have to be light and stiff, and tough enough to survive hard landings, vibration and weather. Injection molding makes that practical at volume: one mold produces thousands of identical frames or housings, with ribs, bosses and snap fits molded in. We combine engineering resins, certified quality systems and a Canadian supply chain for drone makers, including those supplying Canadian defence programs.
Designing Drone Parts for Molding
Good drone parts are designed for the process from the start. Uniform wall thickness avoids sink and warp, ribs add stiffness without adding mass, draft lets parts release cleanly, and gates and knit lines are kept away from arms and mounts that carry load. We review your CAD before steel is cut and suggest changes that save weight and tooling cost.
Engineering Resins for Drone Parts
Drones rely on metal-to-plastic conversion to save weight. The right resin depends on the loads, temperatures and environment each part sees:
- Glass-filled nylon (PA6 and PA66): High stiffness for its weight, a common choice for arms, frames and brackets
- PEEK and PEI: High strength and heat resistance with inherent flame resistance, for parts near motors and batteries
- PPS: Dimensional stability and resistance to fuels, oils and lubricants on fuel-powered UAVs
- Conductive and EMI-shielding compounds: Resins filled with conductive fibres add shielding to housings around flight controllers and radios, and can replace some sheet-metal shields
Automotive-Grade Quality for UAV Components
Manterra is certified to IATF 16949, the automotive quality management standard, as well as ISO 9001 and ISO 13485. We mold parts for automotive tire pressure monitoring systems and instrument clusters, and we apply the same defect-prevention and traceability practices to drone components: documented process settings, first-article inspection and lot traceability.
Sealed Electronics Housings
Enterprise, agricultural and defence drones fly in rain, dust and salt air, so flight controllers, ESCs and batteries need sealed enclosures. With electromagnetic welding, we join housing halves along complex 3D joint lines with a continuous, flash-free weld, sealing the electronics without the weight of gaskets and extra screws.
Threaded Inserts for Field Maintenance
Drones are opened for repairs, battery changes and upgrades. Metal threaded inserts, molded in or installed ultrasonically after molding, give screws strong threads that survive repeated assembly, so housings and modules can be serviced in the field.
A Canadian Supply Chain for Drone Makers
From Delta, BC, in Metro Vancouver, we keep tooling, molding and assembly in Canada. Design changes go straight to our tool room, parts ship domestically, and your designs stay with a Canadian supplier instead of an overseas toolmaker. Shorter shipping also means engineering samples arrive in days rather than weeks. For drone makers selling to defence customers, Canadian tooling and molding also add Canadian content to their bids.
Kanban and Just-in-Time Delivery
Hardware companies can’t afford capital tied up in inventory, or assembly lines waiting for parts. We support Kanban and just-in-time (JIT) delivery, so you can scale assembly while we keep a steady flow of components from Delta to your production floor.
From First Parts to Volume Production
Our 15 Engel presses, from 30 to 450 tons, cover small precision parts through larger airframe components, and robotic part removal keeps cycles consistent at volume.
- Advanced Material Science: We process exotic, aerospace-grade resins like PEEK, PEI, and EMI/RFI shielding compounds to replace heavy metal components, maximizing flight time and structural integrity.
- Automotive-Grade Quality: Operating under rigorous IATF 16949 certification, we guarantee full traceability and zero-defect consistency for mission-critical flight hardware.
- Hermetic & Modular Assembly: We utilize electromagnetic welding for waterproof, weather-sealed electronics housings and ultrasonically welded inserts for robust, modular field maintenance.
- Secure Domestic Logistics: Located in Delta, BC, our fully Canadian operation eliminates geopolitical supply chain risks while supporting agile Kanban and Just-In-Time (JIT) manufacturing schedules for domestic innovators.
- Automated, Scalable Production: Our versatile fleet of 15 injection molding machines (30 to 450-ton), heavily integrated with robotics, allows us to scale from rapid prototyping to high-volume, cost-efficient production seamlessly.